Embedded Update Page - THOMSON SpeedTouch 605 User Manual

Chapter 7
Software Upgrade
Introduction
Procedure
From a remote server
184

7.1 Embedded Update Page

This procedure is OS independent and supports roll-back scenarios. Your
SpeedTouch™ provides storage room for two system software packages: the active
system software the SpeedTouch™ is currently running and a passive package. A
switch over from the one package to the other can be performed.
Proceed as follows:
Go to the embedded web pages.
1
In the menu select SpeedTouch > Update.
2
Choose a way to update your SpeedTouch™. This can be done:
3
From a remote server
From a PC
You can upgrade your SpeedTouch™ from a remote server.
This procedure enforces you to upgrade right away, disconnecting all
connected devices.
Click Check For Updates.
1
In the Pick a task... list, click Update software.
2
The new software is retrieved and stored on the SpeedTouch™, remembering
3
the current configuration and connection states. Your SpeedTouch™ will
automatically restart and restore the connections.
At the end of the procedure, the SpeedTouch™ returns to the Home page.
4
E-DOC-CTC-20050429-0104 v1.0