Hardware Specifications - THOMSON SpeedTouch 605 User Manual

1.1.1 Hardware Specifications

Router
Physical interfaces
LEDs
Reset button
Association button
Wireless performance
Memory and CPU
Cardbus
Power requirement
E-DOC-CTC-20050429-0104 v1.0
Integrated multi-mode ADSL modem, supporting:
ADSL over POTS for a SpeedTouch™ ADSL/POTS variant)
ADSL over ISDN for a SpeedTouch™ ADSL/ISDN variant)
ADSL/RE-ADLS2/ADSL2/ADSL2+ for both ADSL over POTS and ADSL over
ISDN
WAN:
One RJ-11 port for ADSL/POTS or ADSL/ISDN connection
Integrated ISDN Modem S
620)
LAN:
Four RJ-45 ports for managed 10/100Base-T Half-/Full-duplex auto-
sensing MDI/MDI-X Ethernet switch
Wireless LAN: IEEE 802.11b/g Wi-Fi compliant access point on the
SpeedTouch™608 WL/620
LED indicators for all interfaces
One programmable recessed reset button for restoring the factory default settings
One push button for wireless association and registration on the
SpeedTouch™608 WL/620
On the SpeedTouch™608 WL/620:
Typical indoor coverage: 60m
Dynamic rate switching
Manual / Automatic channel selection
Manual / Automatic selection of pure 802.11g, pure 802.11b or mixed mode
(802.11b/g) network
Wireless Distribution System (WDS)
WPA-PSK / WEP data encryption
16 MB flash
32 MB SDRAM
Memory and processor load counters
On SpeedTouch™608 WL/620:
PCMCIA/CardBus plug-in slot for future extension: IPSec acceleration card,
PSTN back-up card, GPRS back-up card, ..
Power supply: 18V AC, 1000mA with patent-pending power-cord lock to avoid
accidental power plug-out
interface (in case of a SpeedTouch™608 WL/
0
Chapter 1
Your SpeedTouch™
5