Routed Pppoe - THOMSON SpeedTouch 605 User Manual

Chapter 5
Expert Configuration

5.4.2 Routed PPPoE

Introduction
Creating a Routed
PPPoE connection entry
Additional configuration
138
The Routed PPPoE configuration page allows you to add new Routed PPPoE, or
Routed PPPoE Relay connection entries or to change settings of existing entries.
To add a Routed PPPoE connection entry:
Click New.
1
In the Interface box, type a unique interface name (different from the MER
2
interface name).
In the Destination list, click the appropriate Routed Ethernet destination
3
indicated by the Routed Ethernet interface name
Type user name and password for the account at the ISP [optional].
4
If applicable, type a Service name and/or Access Concentrator [optional]
5
Click Apply.
6
Once created, per Routed PPPoE connection, additional configuration is possible by
clicking:
Routing
Other
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.
Routing
Following fields are available:
Destination:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label:
Allows you to assign a label to this connection.
E-DOC-CTC-20050429-0104 v1.0