THOMSON SpeedTouch 605 User Manual page 176

Chapter 5
Expert Configuration
Associated stations
Networks
Other Networks
166
The Associated Stations tab allows you to overview the currently associated clients.
To add an associated station to the access control list:
Select the entry you want to explicitly add to the ACL. Associated stations that
1
are not present in the ACL yet, are identified by the name Not Registered
(ACL).
To change the access rights for this station, click Access Control.
2
Change the name of the station (optional but recommended).
3
In the Allowed list, click:
4
Yes to allow it to exchange data with other stations.
No to explicitly deny the station to associate with the SpeedTouch™.
Click Apply to immediately apply your changes.
5
The Networks tab allows you to:
Scan for Other
Enable WDS
The Other Networks tab allows you to overview the wireless networks in your
neighbourhood.
To scan for other wireless networks:
Click Scan.
1
The SpeedTouch™ scans all channels for wireless networks.
2
The SpeedTouch™ lists the available networks in the table.
3
WDS
The Wireless Distribution System (WDS) allows you to extend the range of your
SpeedTouch™ by means of one or more wireless repeater(s).
To allow a WDS connection with a specific access point:
Click New.
1
In the Name box, type an appropriate name for the access point.
2
In the BSSID box, type the BSSID of the access point.
3
Networks.
connections with other wireless devices.
E-DOC-CTC-20050429-0104 v1.0