Specifications - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

SPECIFICATIONS

ENGINE
Number of engines
Engine type
Exhaust system
Lubrication
Number of cylinders
Displacement
Rev limiter setting
COOLING
Type
Coolant
ELECTRICAL
Magneto generator output
Ignition system type
Spark plug
Starting system
Battery
Fuses
FUEL SYSTEM
Fuel type
Fuel injection type
➀ Recommended: Exide R-24-130, 12 V, 25 A•h (130 minutes reserve) or R-24-160
(160 minutes) or equivalent.
Battery posts: On top. Round taper type.
Battery maximum allowed size:
285 mm (11-1/4 in) long x 190 mm (7-1/2 in) wide x 238 mm (9-3/8 in) high.
90
Type
Oil type
Make and type
Gap
Main
MPEM supply
Charging system
Bilge air blower
Bilge pump
Navigation lights
Gauges supply
Auxiliary system
SPEEDSTER 200
ROTAX 1503 4-TEC, 4-stroke
Over Head Camshaft (OHC), liquid cooled
Water cooled/water injected with regulator
Dry sump with replaceable oil filter
4-stroke engine oil SAE 10W40
(API Service classification SG,SH or SJ
1498 cm³ (91.41 in
Liquid cooled. Closed circuit
(see also EXHAUST SYSTEM)
Ethylene-glycol 50%/50% antifreeze/water
coolant containing corrosion inhibitors for internal
combustion aluminum engines
380 W @ 6000 RPM
DI (Digital Induction)
NGK, DCPR8E (resistor type)
0.75 mm (.029 in)
Electric starter
Not supplied ➀
Regular unleaded gasoline with 87 octane
(Ron + Mon)/2 specification
Multipoint Fuel Injection.
Single throttle body (52 mm (2.05 in)).
2
3 in line
3
)
7650 RPM
20 A (3)
5 A
15 A (2)
7.5 A
3 A
3 A
5 A
10 A