Deck Drain; Flushing Connectors; Ventilation Ducts; Bow/Stern Eyelets - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

39) Deck Drain

Located behind the driver's seat, the
deck drain provides water drainage
from rain, deck washing, water splash-
ing, etc. Keep clean to avoid clogging.
F09L53Y
TYPICAL
1. Driver's seat
2. Deck drain

40) Flushing Connectors

Refer to POST-OPERATION CARE sec-
tion for proper use.
NOTE: Each engine is provided with a
flushing connector located on the jet
pump support. Port connector is for
port engine and starboard connector is
for starboard engine.
1
F13L1GY
1. Flushing connectors

41) Ventilation Ducts

This is where air flows to supply en-
gines and ventilate engine compart-
ment. They should never be obstruct-
ed.
50
2 1
F13L1HY
TYPICAL — PORT SIDE SHOWN

42) Bow/Stern Eyelets

Eyelets can be used for mooring, tow-
ing and as a tie-down point during
transportation.
F13L1IY
TYPICAL
1. Stern eyelet

43) Jet Pump Nozzles

Turn side to side via input from the
steering wheel. This provides direc-
tional control when engines are run-
ning. Refer to Propulsion under Princi-
ple of Operation.

44) Reverse Gates

When selecting the neutral or reverse
position with the shift lever, the re-
verse gates move up or down to obtain
the desired position.
WARNING
Never use gates as a supporting
point to board the craft. Shift lever
should only be used when the en-
gine is idling and craft is complete-
ly stopped.
1