Engine Coolant - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

1
F09D0SY
TYPICAL
1. Oil cap
10. Properly reinstall oil cap and dipstick.

Engine Coolant

Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
NOTE: When available, it is recom-
mended to use biodegradable anti-
freeze compatible with internal com-
bustion aluminum engines. This will
contribute to protecting the environ-
ment.
Cooling system must be filled with wa-
ter and antifreeze solution (50% water,
50% antifreeze).
Bombardier sells premixed coolant with
freezing protection up to - 52°C (- 62°F)
(P/N 293 600 038).
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
different brands unless cooling system
is completely flushed and refilled. Refer
to an authorized Bombardier Sea-Doo
dealer.
Coolant Level
WARNING
Check coolant level with en-
gine(s) cold. Never add coolant in
cooling system when engine(s) is
hot.
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir when
each engine is cold.
F18E0NY
1. Level between marks when engine is cold
NOTE: The sport boat is level when it
is in water. When on a trailer, raise trail-
er tongue and safely block in this posi-
tion when bumper rail is level.
Add coolant to have the level between
marks as required. Use a funnel to
avoid spillage. Do not overfill.
Properly reinstall and tighten filler cap
then reinstall seat extension.
NOTE: A cooling system that frequent-
ly requires coolant indicates leaks or
engine problems. See an authorized
Bombardier Sea-Doo dealer.
Coolant Replacement
Refer to MAINTENANCE section.
WARNING
In order to avoid potential burns,
do not remove the radiator cap or
loosen the engine drain plug if
the engine is hot.
1
55