Periodic Inspection; Throttle Cables; Fuel And Oil Filters; Steering/Jet Pump Nozzle Adjustment - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

Rear Storage Compartment Cover
Cylinders
Lubricate rod of cylinders.

Periodic Inspection

Routine maintenance is necessary for
all mechanized products. A periodic in-
spection contributes to the products
life span.
The Periodic Inspection chart at the
end of this document gives guidelines
for regular sport boat servicing sched-
ule to be performed by you and/or by
an authorized dealer. The schedule
should be adjusted according to oper-
ating conditions and use.

Throttle Cables

Move the throttle levers forward and
rearward once. They must operate
smoothly. Refer to an authorized deal-
er if adjustment is necessary.
WARNING
Do not alter or tamper with throttle
cables adjustment or routing.
F09F0EY
TYPICAL — THROTTLE LEVERS
1. Must move freely

Fuel and Oil Filters

These filters must be replaced by an
authorized dealer annually. Fuel sys-
tem pressurization should be conduct-
ed at the same time.
CAUTION: An obstructed oil filter
will cause oil starvation resulting in
serious engine damage.
Steering/Jet Pump Nozzle
Adjustment
When the steering is aimed in straight
ahead position, the jet pump nozzles
should be in the same direction to allow
the sport boat to run in a straight line.
Refer to an authorized dealer if an ad-
justment is necessary.

Reverse Gates

When shift lever is in forward position,
reverse gates should be in an upward
1
position and locked. With the shift le-
ver in neutral position, reverse gates
should be in intermediate position.
When shift lever is in reverse position,
reverse gates should be in downward
position. Refer to an authorized dealer
if an adjustment is necessary.
WARNING
Ensure the steering/jet pump noz-
zles operate freely from side to side
and are not stressing the steering
cables.
WARNING
Ensure the shifter/reverse gates
operate freely and are not stressing
the reverse cable.
77