Operating Instructions; Launching/Loading; Trailering - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

OPERATING INSTRUCTIONS

WARNING
Always perform PRE-OPERATION
CHECKS before operating the craft.
Become thoroughly familiar with
all controls and the function of
each. Should any control or instruc-
tion be not fully understood, refer
to an authorized Sea-Doo dealer.

Launching/Loading

CAUTION: Before launching the
craft, ensure the main battery cut-off
switch is turned ON and the bilge
plug is fully screwed into place.
Before loading or launching the boat
on/from the trailer, ensure that the ICS
(Inlet Clearance System) is completely
in the up position, eliminating the pos-
sibility of contact with the trailer.
CAUTION: Loading/launching the
boat on/ from the trailer with the wa-
ter intake grate in lower position will
cause damage to the ICS (Inlet
Clearance System) and possibly to
the fiberglass hull.
2
F04J2UY
TYPICAL — WRONG POSITION
1. Trailer frame
2. Grate in fully open position
F04J2XY
TYPICAL — CORRECT POSITION
1. Trailer frame
2. Grate in fully close position
When finished with loading the boat
on trailer, it is suggested to turn the
main battery cut-off switch to OFF.
After loading the craft, ensure the
main battery cut-off switch is turned
OFF and the bilge plug is removed to
drain bilge.

Trailering

Refer to the trailer instructions for
proper capacity, operation, mainte-
nance, accessories and warranty.
Check the regulations in your area con-
cerning towing a trailer, especially the
following rules:
– brake system
– tow vehicle weight
– mirrors.
1
NOTE: An optional brake system is
available for your trailer, see an autho-
rized Sea-Doo dealer.
2 1
61