Navigation Light Bulb Replacement; General Inspection And Cleaning - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

WARNING
If bilge blower does not operate
properly, refer to an authorized
dealer before starting the sport
boat.
Navigation Light Bulb
Replacement
Bow Light
F13L1LY
TYPICAL
1. Remove this screw
F13H07Y
TYPICAL
1. Lift up to remove bulb
Assembly is essentially the reverse of
removal procedures. However, pay
particular attention to the following:
Apply dielectric grease on new bulb
contact surface.
Stern Light
Unscrew lens counterclockwise and
pull it out.
80
1
1
F04H2UY
1. Unscrew then pull
Pull bulb to remove it.
F04H2VY
1. Pull bulb out
Apply dielectric grease on new bulb
contact surface.
The assembly is the reverse of remov-
al procedure.
General Inspection and
Cleaning
Inspection
Check engine compartment for any
damage and the fuel systems for
leaks. Also check battery for electro-
lyte leaks. Ensure all hose clamps are
properly secured and no hose is
cracked, kinked or presenting any oth-
er damage.
1
1