Bilge Drain Plug; Grab Handles; Rear Grab Handle(S); Ladder - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

16) Bilge Drain Plug

Should water be left in the bilge, it can
be easily drained by unscrewing the
bilge drain plug.
Lift the bow up slightly so that the wa-
ter can completely flow out of the bilge.
F13L18Y
TYPICAL
1. Drain plug
2. Loosen
3. Tighten

17) Grab Handles

Provide a handhold for the passen-
gers.
CAUTION: Never use the grab han-
dles to pull anything or to lift the craft.
Refer to components location illustra-
tions at the beginning of this section
for grab handle locations.

18) Rear Grab Handle(s)

Provide a handhold for boarding when
needed.
CAUTION: Never use the grab han-
dle to tow anything or to lift the craft.

19) Ladder

Located under the swim platform, the
ladder conveniently helps in reboard-
ing the craft.
WARNING
Engines should be OFF when us-
ing ladder. Keep limbs away from
jets or intake grates. Only one per-
son at a time on the ladder. Never
use the ladder for pulling, towing,
diving or jumping, boarding a
craft that is out of the water or any
other purpose other than a ladder.
44
2 3
1
Pull latch to release the ladder.
F13L19Y
TYPICAL
1. Latch
Slide ladder toward rear, then push down.
F13L1AY
TYPICAL — LADDER LOWERED
To store ladder, lift horizontally com-
pletely, slide toward front and secure
latch.

20) Swim Platform

Provides an anti-skid surface for easy
boarding from rear of craft.
WARNING
Engines must be off when using
swim platform. Keep away from
jets or intake grates.

21) Seats

Each passenger should be seated while
underway.
WARNING
Allow no one to sit on edge of boat
or to stand up while in operation.
Seat/grab handles should be used
in rough waters.
1