Deck Light Switch; Horn Switch; Inlet Clearance System (Ics) Switch; Fuel Gauge - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

Table of Contents

Advertisement

9) Deck Light Switch

F10A05Y
Press switch to ON position to turn on
the deck lights.
Press switch to OFF position to turn
off the deck lights.
Using the deck lights for a prolonged
time when the engine is not running
will discharge the battery.

10) Horn Switch

F10A04Y
Press and hold the switch to activate
the horn.
Release the switch to stop horn.
11) Inlet Clearance
System (ICS) Switch
Located next to the driver's seat, this
switch allows grates to open beneath
hull to dislodge weeds or accumulated
debris near the water intakes.
42

12) Fuel Gauge

Fuel Gauge
Located in dashboard, this analog gauge
continuously indicates the amount of
fuel in fuel tank when engines are run-
ning.
The gauge is illuminated whenever the
navigation lights are used.
The fuel level can also be verified with-
out having engines running. With the
safety lanyard removed from its
switch, push a start/stop button; the
gauge will be activated for approxi-
mately 30 seconds.
F13H02Y
FUEL LEVEL GAUGE

13) Tachometers

Analog tachometers indicate the revo-
lutions per minute (RPM) of the en-
gines. Multiply reading by 1000 to ob-
tain actual RPM.
The gauges are illuminated whenever
the navigation lights are used.
1
F13H03Y
TYPICAL
1. Port engine tachometer
2. Starboard engine tachometer
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents