Siemens POINTEK CLS100 Compact Operating Instructions page 11

HIGH Alarm
Note: numbers refer to enclosure versions. See p. 7
4 / 20 mA Loop Alarm Application
Fully Synthetic Process Connection (Enclosure Version)
Stainless Steel Process Connection (Integral Cable or Enclosure Version)
Intrinsically Safe Version only
Solid State Switch Application
7ML19985QJ83
Note: numbers
refer to enclosure
versions. See p. 7
Note: numbers
refer to enclosure
versions. See p. 7
Note: numbers refer to
enclosure versions. See p. 7
Pointek CLS100 – QUICK START MANUAL
Solid state switch output
+
12-33 V DC (polarity determines operation)
-
Rmax = V supply – 12 V
20 mA
For example, 250 :
gives 1 or 5 V DC switch
voltage to PLC.
V supply
12-33 V DC
Rmax = V supply – 12 V
20 mA
For example,
250 : gives 1
or 5 V DC
switch voltage
to PLC.
V supply
12-33 V DC
Solid state switch output
IS barrier required
V supply
IS barrier required
10-30 V DC
Page EN-9