Training - Kettler M-Display Training And Operating Instructions

Training

1. Training Without Settings
• Press any key
and/or
• tread on pedals (as under Quickstart)
2. Training With Settings
display: "Training Readiness"
• Press " ": settings area
Time Setting (min)
• With "Plus +" or "Minus –", enter value (e.g., 30:00)
onfirm with " ".
Display: next menu "COURSE"
Setting Course (miles or km)
• With "Plus +" or "Minus –", enter value (e.g., 7.5)
Confirm with " ".
Display: next menu "ENERGY"
Setting Energy (kcal or KJoule)
• With "Plus +" or "Minus –", enter value (e.g., 780)
Confirm with " ".
Note:
The settings are saved.
• Pedaling
In settings, count goes downwards.
Training Pause or Training End
With less than 14 pedal rpm, the device's electronics
recognize a Training Pause. Rotations and Speed are
represented as Average Values with the Ø symbol.
The Training Data is displayed for 4 minutes. If, during
this time, you press no keys and do not train, the electro-
nics will switch to Standby mode.
Training Resumption
If Training is continued within 4 minutes, the last values
will be further counted or counted down.
M-Display
15
EN