Eu Declaration Of Conformity; Fcc - CAB HERMES Q2L Assembly Instructions Manual

10 Licenses
32
10.2

EU Declaration of Conformity

We declare herewith that the following device as a result of design, construction and the version put in circulation
complies with the relevant fundamental regulations of the EU Rules for Safety and Health. In the event of any alteration
which has not been approved by us being made to any device as designated below, this statement shall thereby be
made invalid.
Device:
Type:
Applied EU Regulations:
Directive 2014/30/EU relating to electromagnetic compatibility
Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
Commission delegated directive (EU) 2015/863 amending Annex
II to Directive 2011/65/EU of the European Parliament and of the
Council as regards the list of restricted substances
Signed for, and on behalf of the Manufacturer :
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
10.3

FCC

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. The equipment
generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user may be required to correct the
interference at his own expense.
EU Declaration of Conformity
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Germany
Label Printer
HERMES Q
Applied Standards:
• EN 55024:2010
• EN 55032:2012
• EN 61000-3-2:2014
• EN 61000-3-3:2013
• EN 61000-6-2-2005
• EN 50581:2012
Sömmerda, 22.10.2019
Erwin Fascher
Managing Director
32