Connect The Grounding Cable - Juniper ACX5096 Quick Start Manual

Connect the Grounding Cable

To connect earth ground to an ACX5096 router:
1. Secure the provided protective earthing terminal bracket through the ACX5096 router mounting bracket
to the chassis with the nut provided. The posts on the protective earthing terminal bracket should point
to the left. See Figure 5 on page 8
Figure 5: Connecting a Grounding Cable to a 1 U ACX5096 Router
Figure 6: Connecting a Grounding Cable to the 2 U ACX5096-96S Router
2. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the router
is mounted.
3. Place the grounding lug attached to the grounding cable over the protective earthing terminal on the
protective earthing terminal bracket.
4. Secure the grounding lug to the protective earthing terminal with two nuts.
5. Dress the grounding cable and ensure that it does not touch or block access to other router components
and that it does not drape where people could trip over it.
and Figure 6 on page 8.
0
1
48
49
10
8
6
4
2
11
9
7
5
3
58
56
54
52
50
59
57
55
53
51
8