Safety Warnings - Juniper ACX5096 Quick Start Manual

[edit]
root@# set interfaces em0 unit 0 family inet address address/prefix-length
NOTE: The management ports, em0 (C0) and em1 (C1), are found on the FRU end of the
ACX5096 router.
9. (Optional) Configure the static routes to remote prefixes with access to the management port.
[edit]
root@# set routing-options static route remote-prefix next-hop destination-ip retain no-readvertise
10. Enable Telnet service.
[edit]
root@# set system services telnet
11. Commit the configuration to activate it on the router.
[edit]
root@# commit

Safety Warnings

WARNING:
including translations, see the ACX5000 router documentation at
https://www.juniper.net/documentation/.
WARNING:
death.
This is a summary of safety warnings. For a complete list of warnings,
Failure to observe these safety warnings can result in personal injury or
13