Step 2: Install The Router; Tools Required To Install The Router In A Rack; Install The Mounting Brackets - Juniper ACX5096 Quick Start Manual

Step 2: Install the Router

IN THIS SECTION

Tools Required to Install the Router in a Rack | 4

Install the Mounting Brackets | 4

Install the ACX5096 Router in the Rack | 6
Tools Required to Install the Router in a Rack
To install and configure a Juniper Networks ACX5096 router, you need:
Two people—one for lifting and one for securing the router to the rack
Electrostatic discharge (ESD) grounding strap (not provided)
One pair of side mounting rails (provided)
One pair of rear mounting blades (provided)
Twenty-four flat-head M4x6-mm Phillips mounting screws to secure the mounting-rail to the chassis
(provided)
Eight screws to secure the chassis and mounting-blades to the rack (not provided)
Screwdriver appropriate for your rack mounting screws (not provided)
Two power cords with plugs appropriate for your geographical location (provided)
RJ-45 cable and RJ-45 to DB-9 serial port adapter (provided)
Management host, such as a PC laptop , with a serial port (not provided)
(Optional) Grounding cable kit with bracket, lug, and three nuts with integrated washers. To install the
grounding cable, see the ACX5096 router documentation at https://www.juniper.net/documentation/
Install the Mounting Brackets
The ACX5096 router can be mounted in either a two or four-post rack configuration.
4