Danfoss VLT Series Design Manual page 102

5. How to Install
5.4.6. Direction of Motor Rotation
The default setting is clockwise rotation with
the frequency converter output connected as
follows.
Terminal 96 connected to U-phase
Terminal 97 connected to V-phase
Terminal 98 connected to W-phase
Thedirection of motor rotation is changed by
switching two motor phases.
5
5.4.7. Motor Thermal Protection
The electronic thermal relay in the frequency converter has received the UL-approval for single
motor protection, when par. 1-90
Motor current, I
102
Motor Thermal Protection
is set to the rated motor current (see motor name plate).
M,N
MG.11.B2.02 - VLT
ETR Trip
is set for
®
is a registered Danfoss trademark
®
VLT HVAC Drive Design Guide
and par. 1-24