Manual output of data sent to Trotec JobControl
1. Select the Trotec UniDrive [Convert Man-
ually] menu.
• The [UniDrive (Manual Mode)] dialog is dis-
played.
2. Uncheck the [Quick Print] check box.
3. Save the settings in a parameter file.
(
P.11 "Create a cutting conditions
parameter file."Step.(6) to Step.(8))
4. Output the cut data from FineCut.
(
P.21 "Laser cutting"Step.3 to Step.6)
5. The cut data is automatically loaded by
Trotec Job Control.
6. Click the loaded data to select it.
7. Click the [WYSIWYG on/off] icon.
• The system will enter Cut Line display mode.
8. Set the media on the Trotec Speedy
Laser Engraver.
9. Adjust the height.
- 36 -