Laser Cutting Output Procedure - Trotec Speedy Series Manual

Laser cutting output procedure

Printing and cutting (P.16)
1. Create the data (P.16)
1. Create the data using Adobe Illustrator (P.16)
• Create the print data, cut data, and alignment frame
2. Printing (P.17)
1. Printing the alignment frame data on paper media (P.17)
2. Printing the print data on media (P.19)
3. Laser cutting using the Trotec Speedy Laser Engraver (100/300/360/400)
1. Set the media. (P. 21)
2. Output from FineCut to the Trotec Speedy Laser Engraver. (P. 21)
*1. Alignment frame: This is a frame that acts as a reference to prevent shifting during printing and cutting. All data must
be created so that it fits within this frame.
- 6 -
*1
data.