Rear Panel I/O Ports
DVI-I
PS/2 KB/MS
COM 1
USB 2.0*2
VGA
DP++
The rear panel I/O ports consist of the following:
•
2 x GbE (RJ-45)
•
1 x RS-232 (DB-9)
•
4 x USB 3.0
•
2 x USB 2.0
•
1 x PS/2 Keyboard/Mouse port
•
1 x VGA
•
1 x DVI-I (DVI-D signal)
•
1 x DP++
•
1 x Line-in (available upon request)
•
1 x Line-out
•
1 x Mic-in
Chapter 2 Hardware Installation
Chapter 2
LAN 1
LAN 2
Line-out
USB 3.0*4
Mic-in
PS/2 Keyboard/Mouse Port
PS/2 Keyboard/Mouse
This rear I/O port is used to connect a PS/2 keyboard/mouse. The PS/2 mouse port uses
IRQ12.
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power-on the system. To use this function:
Important:
The +5V_standby power source of your power supply must support ≥720mA.
19
www.dfi.com