Fronius Agilo 360.0-3 TL Operating Instructions Manual page 68

Yield Setting
-
-
Setting range
Meter deviation
Input of a value for the fed-in energy that will be added to the energy currently fed in (e.g.
carry-over value when replacing an inverter)
Unit
Setting range
Factory setting
Meter unit of measurement
Input of a unit (k..., M...)
Unit
Setting range
Factory setting
Meter calibration
Input of a correction value to ensure that the value shown on the inverter display corre-
sponds with the calibrated display on the electricity meter
Unit
Setting range
Factory setting
DATCOM Checking data communications, entering the inverter number, protocol settings
Setting range
Status
Indicates data communication is taking place via a Fronius Solar Net or that a data com-
munications error has occurred
Inverter number
Sets the number (= address) of the inverter in a system with several solar inverters
Unit
Setting range
Factory setting
IMPORTANT! If a number of inverters are linked together in a data communications sys-
tem, assign a unique address to each one.
66
of an OFFSET value for the total energy display
of a measuring offset factor for the day, year and total energy display
Meter deviation / meter unit of measurement / meter calibration
Wh
Five digits
0
-
k / M
-
%
-5.0 - +5.0
0
Status / inverter number / protocol type
-
00 - 99 (00 = 100th inverter)
01