Fronius Agilo 360.0-3 TL Operating Instructions Manual page 66

The Setup menu items
Standby Manual activation / deactivation of Standby mode
-
-
-
-
-
-
Switching off Standby mode (manually switching off feeding energy into the grid):
1
2
'STANDBY' and 'ENTER' appear alternately on the display.
Standby mode is now active.
The Startup LED shows steady orange.
Resuming feeding energy into the grid:
'STANDBY' and 'ENTER' appear alternately on the display when in Standby mode.
1
The 'Standby' menu item is displayed.
At the same time, the inverter enters the startup phase.
The operating state LED shows steady green when feeding energy into the grid has been
resumed.
Contrast Adjusts contrast on the display.
Unit
Setting range
Factory setting
Since the contrast is temperature-dependent, when the ambient conditions change it may
be necessary to adjust the 'Contrast' menu item.
64
The power electronics are switched off in standby mode. No energy is fed into the grid.
The Startup LED will show steady orange.
In Standby mode, no other menu item in the Setup menu can be accessed or adjusted.
The automatic switchover into the 'NOW' display mode after 2 minutes of keyboard in-
activity does not occur.
Standby mode can only be terminated manually by pressing the 'Enter' key.
Feeding energy into the grid can be resumed at any time (deactivate 'Standby').
Select the 'Standby' menu item
Press the 'Enter' key
Press the 'Enter' key to resume feeding energy into the grid
-
0 - 10
5