NEC Express5800/R320c-E4 Maintenance Manual page 71

Chapter 1 Maintenance
[?] Fail to duplex CPUs:
→ Check the memory configuration is correct.
→ Check third-party CPUs or memory (DIMM) are not used.
[?] The following message appears at OS startup:
→ The following message appears at every time the OS start. However, it does not affect the system
operation.
i8042.c: Can't read CTR while initializing i8042.
I8042: probe of i8042 failed with error -5
ACPI Error: Could not enable RealTimeClock event (20090903/evxfevnt-193)
ACPI Warning: Could not enable fixed event 4 (20090903/evxface-146)
x2apic not enabled, IRQ remapping init failed
Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)
8. Troubleshooting
71