NEC EXPRESS5800/R320c-E4 Configuration Guide VMware model Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC EXPRESS5800 server. November 2013 Revision 2.0 NEC Corporation...
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model Technical Specification Key Features Fault tolerant technology based on GeminiArchitecture Full manageability by integrated EXPRESSSCOPE Engine 3 High performance with the latest Intel® Xeon® processor E5-2600 product family ...
Page 4
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model Model R320c-E4 Power (Max. Config, 1,300 VA / 1,290 Watt Consumption Operating) Dimensions (W x D x H ) 483.0 x 736.0 x 178 mm / 19.0 x 29.0 x 7.0 in (4U) Weight (Minimum / Maximum) 45 kg / 51 kg, 99.21 lbs.
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model External Views Front and Rear Views Front View Legend Drive Bays CPU Fault LED UID Button Memory Fault LED DVD Super Multi Drive Module Power LED System Power LED SAFE TO PULL LED...
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model Rear View Legend USB Connectors AC Inlet Management LAN Connector PCI Slots (Low-Profile) Module ID LED Serial Port Connector Data LAN Connectors VGA Connector For service personnel only. NEC Corporation Revision 2.0, November 2013...
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model Dimensions (mm) Rack mount 748.5 688.5 Tower Conversion (Optional) NEC Corporation Revision 2.0, November 2013...
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model Server Configuration 1 Base Models Product Name / Description Part Number EXPRESS5800/R320c-E4 NP8800-173FP1 no RAM, no 2.5-inch HDD Including: Intel Xeon Processor E5-2603, 1 x DVD Super Multi, EXPRESSBUILDER DVD, ftSys for VMware vSphere5.1...
Page 10
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model Memory Configuration Guideline See the table below for the number of memory kits required in accordance with logical main memory size and number of logical processors. Memory configurations which are not listed below are not supported in the system.
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model 4 Internal Hard Disk Drives Available bays: 8 Product Name / Description Part Number 600GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 600GB N8850-047 900GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 900GB N8850-048 146.5GB 15K Hot Plug 2.5-inch SAS HDD : 1 x 146.5GB...
N8803-038 Controller QLogic QLE2560 8Gbps Fibre Channel Adapters NOTE: For supported NEC Storage products to connect with N8803-038, contact your sales representative or refer to the NEC Storage WEB site. (http://www.nec.com/global/prod/storage/) 7 Other Add-in Components 7.1 Input Devices Category...
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model 8.4 Operating System The R320c VMware models support VMware vSphere 5.1. For installation, please download the vSphere 5.1 from VMware website. Please note that the Part Number differs by the end user’s country.
– CONFIGURATION GUIDE NEC EXPRESS5800/R320c-E4 / VMware model References Server Management The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system management features listed in the table below. Hardware monitoring Temperature/voltage/power/fan Degeneration (memory/hard drive) ...
Supported Guest Operating Systems on VMware vSphere ESXi 5.1 VMware vSphere Client For maintenance of VMware ESX on the NEC Express5800/ft series, a dedicated terminal (e.g. a Windows PC) is required Backup A dedicated server for data backup is recommended.
All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
Need help?
Do you have a question about the EXPRESS5800/R320c-E4 VMware model and is the answer not in the manual?
Questions and answers