Maintenance; Nortronic ® Calibration; Battery Replacement; Repair - norbar NorTronic Series Operator's Manual

MAINTENANCE

NorTronic ® Calibration
Your NorTronic has been supplied with a certificate of calibration. To maintain the specified accuracy it is
®
recommended that the NorTronic is recalibrated at least once per year. Re-calibration should be carried out
®
at Norbar or by a Norbar approved agent, where all the facilities to ensure the instrument is functioning at
maximum accuracy are available.
IMPORTANT: DO NOT REMOVE SIDE PANELS; THERE ARE NO CALIBRATION SETTINGS INSIDE.

Battery Replacement

There are 2 types of batteries in this product. 3 standard AA batteries for powering the NorTronic (which
®
can be removed by the user and recharged when necessary) and a coin cell to power the clock.
The coin cell should only be replaced by Norbar or a Norbar approved agent.

Repair

Repair should be carried out at Norbar or by a Norbar approved agent, where all the facilities to ensure the
NorTronic is functioning at maximum accuracy are available.
®

Cleaning

Do not use abrasives or solvent based cleaners.

Product Disposal

This symbol on the product indicates that it must not be disposed of in the general waste.
Please dispose of according to your local recycling laws and regulations.
Contact your distributor or see the Norbar web site (www.norbar.com) for further recycling information.

Battery Disposal

This product contains 2 types of Batteries. Only dispose of batteries at end of product life.
Batteries contain substances that can have a negative effect on the environment and human health.
The crossed-out wheeled bin means that batteries must NOT be disposed of in the general waste.
All batteries must be disposed of at a local waste battery collection point.
The batteries do NOT contain mercury (Hg), cadmium (Cd) or lead (Pb). If the battery substances exceed the
legal limits the battery would be marked with Pb, Cd or Hg.
29