Set Length Range For Code 11 - Newland NLS-HR20-RF User Manual

One Check Character, MOD11 (Len <= 11)
Two Check Characters, MOD11/MOD11 (Len > 11)
One Check Character, MOD11 (Len <= 11)
Two Check Characters, MOD11/MOD9 (Len > 11)
** Transmit Check Character
Do Not Transmit Check Character

Set Length Range for Code 11

The scanner can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 4)
Set the Maximum Length (Default: 80)
Example: Set the scanner to decode Code 11 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2. Scan the numeric barcodes "0" and "8" from the "Digit Barcodes" section in Appendix.
3. Scan the Set the Maximum Length barcode.
4. Scan the numeric barcodes "0" and "C" from the "Digit Barcodes" section in Appendix.
65