Set Length Range For Code 11 - Newland NLS-BS30 User Manual

Enter Setup

Set Length Range for Code 11

The scanner can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 4)
If minimum length is set to be greater than maximum length, the scanner only decodes Code 11 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only Code 11
barcodes with that length are to be decoded.
Set the scanner to decode Code 11 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
3.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
4.
5. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
6.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
7.
8. Scan the Exit Setup barcode.
** Exit Setup
Set the Maximum Length (Default: 48)
124