HR20 Scanner
Charging the Scanner Battery
To charge the scanner battery, connect the scanner to your computer with the supplied cable. You can check the charge
status with the Good Read/Network LED (red) on the scanner.
Plug and Play
The scanner that comes with a USB dongle is already paired with it and can work out of the box through plug and play.
Only one scanner can be paired to one dongle at a time. If you want to pair your scanner to another dongle, follow the
instructions described in the "Pairing the Scanner to a Dongle" section in Chapter 3.
Good Read/Network LED:
Red LED On – Charging in progress.
Red LED Off – Fully charged.
Blue LED On - Connection established.
Blue LED flashes - Data transmission in progress.
Green LED flashes once - Good read in Real-time mode.
Blue LED flashes once - Good read in Inventory mode.
2