Transmit Delay Per 12 Characters - Newland NLS-HR20-RF User Manual

Transmit Delay per 12 Characters

Transmit Delay per 12 Characters applies to expanded Febraban only. This feature is available only when USB HID
Keyboard is enabled.
** Disable Transmit Delay per 12 Characters
To set this parameter, scan the Set Transmit Delay per 12 Characters barcode below and then a numeric barcode (0-7,
which represent 0ms, 300ms, 400ms, 500ms, 600ms, 700ms, 800ms and 900ms, respectively). The default value is
500ms.
Example: Set the transmit delay per 12 characters
1. Scan the Set Transmit Delay per 12 Characters
2. Scan the numeric barcodes "0" and "4" from the "Digit Barcodes" section in Appendix.
Set Transmit Delay per 12 Characters
to 600ms:
barcode.
Enable Transmit Delay per 12 Characters
48