Table of Contents
Advertisement
Communication Cables Pin-Out
Your printer uses industry standard connections for Serial, USB and is therefore
compatible with standard printers and hosts on the market.
Please note that due to the power requirements of thermal printers, the unit will not
function with the USB cable alone. The power cord must be connected to the printer.
Several connector options are available depending on the interface card installed on the
back of the printer.
The table below details the connection pin-out for the RS-232 interface on the printer side.
Pin
Signal Name
1
AUX_PWR
2
RS232_TXD
3
RS232_RXD
4
No connect
5
DGND
6
No connect
7
RS232_CTS
8
RS232_RTS
9
NC or PWR
The table below details the connection pin-out for the power supply interface on the
printer side. The Nanoptix power supply conforms to GDS Standards.
2.4 Communicating with the Printer
Over the years, Nanoptix has developed emulations for compatibility with the most
popular printers in the market. At the time of printing this manual, the following emulations
are available:
- TM88 / Nanoptix Command set (default from factory)
Please contact your sales representative if you require other emulations. If we do not
have the emulation you need, we can provide most emulation in a short timeframe. If you
are not required to emulate other printers, please ask your sales representative for the
latest Nanoptix Windows Driver or suggestions on which command will meet your
requirements.
720007-0000R
July 2013
High Speed Video Lottery Thermal Printer
Printer I/O
5V Output
Output
Input
n/a
Ground
n/a
Input
Output
No connect
Table 11: RS-232 DB9 Female Interface
Pin
Allocation
1
+12V
2
Ground
3
Ground
4
+24V
Table 12: 4 Pin Molex Power Interface
Owner's Manual
Host I/O
Printer Function
n/a
Aux Power (100mA)
Input
Data transmit
Output
Data receive
n/a
n/a
Ground
Signal Ground/Aux Ground
n/a
n/a
Output
Handshake
Input
Handshake
No connect
reserved
20
Advertisement
Table of Contents
