Printer Disassembly - Nanoptix Suzohapp HSV Owner's Manual

4. Printer Disassembly

Use ESD protection (such as a wrist strap)
4.1 Removing the Mech. Assembly
1. Remove the power source from the printer before disassembly.
2. Remove the paper roll from the printer by following the steps in reverse outlined in
1.4 (Changing the paper)
3. Remove the two screws holding on the plastic plate covering the main board. Slide
the cover away from the mech. assembly.
720007-0000R
July 2013
High Speed Video Lottery Thermal Printer
anytime a PCB is exposed
Figures 16 & 17: Circuit Board Cover Removal
Owner's Manual
24