Display; Keypad - Husqvarna 430XH Operator's Manual

1.10 Display

The display on the product shows information
and settings of the product.
To access the display, push the STOP button.

1.11 Keypad

The keypad on the product let the operator
navigate in the menu of the product. To access
the keypad, push the STOP button.
3
2
1
7
1. The START button is used to start the
operation of the product.
2. The BACK button is used when moving back
up in the menu lists.
3. The arrow buttons are used to navigate in
the menu.
4. The OK button is used to confirm the chosen
settings in the menus.
5. The MENU button is used to go to the main
menu.
6. The PARK button sends the product to the
charging station.
7. The number buttons are used to enter digits,
for example, PIN code, time and date.
10 - Introduction
4
5
6
1230 - 001 -