Automower ® Connect App - Husqvarna 430XH Operator's Manual

3.8.2 To do the basic settings
Before you start the product for the first time, you
must do the basic settings and calibrate the
product.
1. Push the STOP button.
2. Set the Main switch to 1.
3. Push the arrow buttons and the OK button.
language, country, date, time and set
Select
a PIN code.
Note: It is not possible to use 0000 as PIN
code.
4. Put the product in the charging station.
5. Push the START button and close the hatch.
Note: Some models require a factory PIN code
before the selection of personal PIN code.
Note: Use the MEMO page at the beginning of
the manual to make a note of the PIN code.
Introduction on page 3 .
The product then moves away from the charging
station and stops, while it calibrates some of the
product settings.
®
3.9 Automower Connect app
The product can connect to mobile devices that
®
have the Automower Connect app installed. The
app uses long-range cellular connectivity.
®
Automower Connect is a free app for your
mobile device. The Automower
gives extended functions to your Husqvarna
product. You can:
• See the status of your product.
• Change settings to your product.
• Get extended product information.
• Get an alarm if the product moves out of the
work area.
To pair the product with the app, refer to
®
Automower Connect on page 32 and To pair
®
Automower Connect and the product on page
32 .
1230 - 001 -
3.9.1 To install the Automower
app
1.
2.
3.
3.9.2 Automower
The main menu in Automower
options:
•
•
•
3.9.2.1 Dashboard
The dashboard shows the current status of the
product both visually and in text. It is very easy to
control the product by tapping the controls, for
example
In the lower part of the dashboard there are
shortcuts to the
dashboard also shows symbols according to
below:
1.
2.
®
Connect app
Download the Automower
your mobile device.
Sign up for a Husqvarna account in the
®
Automower Connect app.
Log in to your Husqvarna account in the
®
Automower Connect app.
®
Connect menu
®
Dashboard
Map (only available with Automower
Connect)
Settings
Park .
Timer settings and the Map . The
The battery status shows the remaining
battery charge. A flash is shown over the
battery symbol when the product charges its
battery. A plug is shown over the battery
symbol when the product is standing in the
charging station without charging.
Cutting height.
®
Connect
®
Connect app on
Connect offers 4
®
Installation - 23