Expert Menu (Mma) - EWM Pico 220 cel puls Operating Instructions Manual

Design and function
TIG welding
Display
More parameters can be set in the Expert menu > see 5.2.7 chapter.
5.2.7

Expert menu (MMA)

The Expert menu has adjustable parameters stored that don't require regular setting. The number of
parameters shown may be limited, e.g. if a function is deactivated.
Display
The setting ranges for the parameter values are summarised in the Parameter overview
section > see 10.1.3 chapter.
26
Setting/selection
Pulse welding (average value pulses)
------- Function switched on
------- Function switched off (ex works)
Pulse frequency
ENTER
Setting/selection
Arcforce correction
•
Increase value > harder arc
•
Decrease value > softer arc
Pulse balance
Pulse current > see 5.2.6 chapter
Arc length restriction > see 5.7 chapter
------- Function switched on
------- Function switched off
Figure 5-13
EXIT
099-002057-EW501
04.03.2019