EWM Pico 220 cel puls Operating Instructions Manual page 9

Explosion risk!
Apparently harmless substances in closed containers may generate excessive pressure
when heated.
•
Move containers with inflammable or explosive liquids away from the working area!
•
Never heat explosive liquids, dusts or gases by welding or cutting!
Fire hazard!
Due to the high temperatures, sparks, glowing parts and hot slag that occur during
welding, there is a risk of flames.
•
Be watchful of potential sources of fire in the working area!
•
Do not carry any easily inflammable objects, e.g. matches or lighters.
•
Ensure suitable fire extinguishers are available in the working area!
•
Thoroughly remove any residue of flammable materials from the workpiece prior to starting
to weld.
•
Only further process workpieces after they have cooled down. Do not allow them to contact
any flammable materials!
099-002057-EW501
04.03.2019
WARNING
For your safety
Safety instructions
9