Install the Fixture
WARNING:
The installation location must support a minimum point load of 10
•
times the weight of the fixture.
The installation must always be secured with a secondary safety
•
attachment. An appropriate safety cable is supplied.
Safety cable attachment must be rated by a safety factor of 10.
•
Use of third party clamps are permitted, but they should comply with
•
the local jurisdiction and be approved by the Authority Having
Jurisdiction.
A supportive and stable surface must be used when the fixtures are
•
placed on the feet.
The operating temperature range for this fixture is -10°C–45°C (14°F–
•
113°F). Do not operate the fixture outside of this range.
Never stand directly below the installed fixture when mounting,
•
removing, or servicing the fixture.
All safety and technical aspects of fixture installation must be
•
approved by a qualified person before operation.
The installation must be regularly inspected by a qualified person.
•
Overhead rigging must be performed by qualified personnel.
•
CAUTION:
Authority Having Jurisdiction. The installation must only be carried out by
qualified personnel.
You can install the fixture in any of the orientations shown below.
8
Follow all local codes and recommended practices by the
SolaWash 1000 User Manual