Network Settings; Ip Settings - TANDBERG 1000 User Manual

Network Settings

The network settings menu enables you to configure IP, TFTP, wireless LAN and DNS.
NOTE Y
OU SHOULD NOT CHANGE ANY NETWORK SETTINGS WITHOUT CONFIRMING THIS WITH YOUR SYSTEM ADMINISTRATOR
CONFIGURATION MAY CAUSE MALFUNCTION IN YOUR UNIT

IP Settings

IP-assignment
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by
the DHCP server.
Static: The unit's IP-address and IP-subnet mask must be specified in the IP-address field.
TANDBERG 1000/550 for Cisco CallManager
.
25
NOTE T W LAN S
HE IRELESS ETTINGS MENU MAY NOT
. T
BE AVAILABLE HIS DEPENDS ON WHETHER
W
YOUR UNIT HAS A IRELESS
.
OR NOT
. I
NCORRECT NETWORK
C
NOTE
HANGES IN THIS MENU WILL NOT HAVE ANY
EFFECT BEFORE THE SYSTEM IS RESTARTED
Advanced Use
LAN
CARD SLOT
.