Calls; Placing A Call On Hold; Resuming A Call On Hold; Transferring A Call To Another Extension - TANDBERG 1000 User Manual

Advanced Use
I
TIP
NSTEAD OF USING THE NUMBER KEYS TO ACCESS THE LINES OR SPEED DIALS YOU CAN HIGHLIGHT THE DESIRED FIELD USING THE NAVIGATION KEYS ON
THE REMOTE CONTROL AND THEN PRESS

Calls

The calls menu shows the state of the current calls. If you are in multiple calls, use the up/down navigation keys
on the remote to 'select' a call. The three softbuttons on the screen will change according to the state the
selected call is in.
TIP T C M
HE ALLS ENU WILL AUTIMATICALLY POP UP ON THE SCREEN WHENEVER YOU GRAB THE REMOTE CONTROL AND MOVE IT

Placing a Call on Hold

Press the Hold softbutton.
NOTE
E H
NGAGING THE OLD FEATURE GENERATES MUSIC

Resuming a Call on Hold

Press the Resume softbutton.

Transferring a Call to Another Extension

Follow these steps to transfer a call to another extension:
1. During a call, press the Trnsfer softbutton. This puts the call on hold.
2. Dial the number to which you want to transfer the call.
3. When it rings on the other end, press Trnsfer again. Or, when the party answers announce the call and
then press Trnsfer.
4. Now the call is transferred and the call is ended. If the party refuses the call, press the Resume
softbutton to return to the original call.
TANDBERG 1000/550 for Cisco CallManager
O .
K
. F ,
OR THIS REASON AVOID PUTTING A CONFERENCE CALL ON HOLD
20
.
.