General Use; Adjusting Volume; View Outgoing Video (Selfview); Microphone On/Off - TANDBERG 1000 User Manual

General Use

Adjusting Volume

Press the V
OLUME
+
-

View Outgoing Video (Selfview)

selfview
Press the S
ELFVIEW
To change the image being viewed on the monitor during a call press S
move pip
Press M PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to
OVE
switch it off.

Microphone on/off

mic off
To mute your microphone, press M
Press M O to activate the microphone again.
IC FF

Speaker on/off

To switch off your speaker in a call, press the push-button at the front of the system. An indicator will appear. The
headset output, marked 'Audio out', on the back of the system will then provide the audio of the system. The
push-button can also be used to accept a call.
TANDBERG 1000/550 for Cisco CallManager
keys to adjust the volume level. An on-screen indicator will show the current level.
key to view your outgoing video.
O . An on screen indicator will appear.
IC FF
17
General use
once.
ELFVIEW