Peripheral Equipment; T1000 For Cisco Callmanager Peripheral Equipment; Pc-Interface (Serial Cable); Headset Interface - TANDBERG 1000 User Manual

Peripheral Equipment

This chapter will explain how to connect peripheral equipment to your system, such as computers and head-
sets.

T1000 for Cisco CallManager Peripheral Equipment

PC-interface (serial cable)

A PC can be connected to your T1000 for Cisco CallManager using a serial cable. This enables you to interact
with the unit using data port commands. (This is also possible over LAN, using telnet). The available commands
are specified in a separate document. See the illustration below on how to connect.

Headset Interface

It is possible to use a headset with your T1000 for
Cisco CallManager. To enable audio to your headset,
press the large button in front of your unit.
NOTE
T ISDN
HE CONNECTORS ARE NOT IN USE
TANDBERG 1000/550 for Cisco CallManager
COM port
Audio Mini-jack
Stereo jack (3.5mm) connector for headsets.
31
Peripherals