Power Cable; Lan Cable; Wireless Lan - Insert Pc Card - TANDBERG 1000 User Manual

Power Cable

• Connect the power supply to the 'DC in' input on the system.
• Connect the power cable to the power supply.
• Connect the power cable to an electrical distribution socket.

LAN Cable

• To use the system on LAN, connect a LAN cable from the 'Ethernet' connector on the system to your LAN.

Wireless LAN - Insert PC Card

• Remove the "dummy" card by pressing the 'Eject' button next to the slot.
• Insert the Wireless LAN PC Card.
M
NOTE
AKE SURE YOU INSERT THE CARD IN THE RIGHT DIRECTION
'E '
THE JECT BUTTON POPS UP
See 'Wireless LAN Settings' for configuration.
TANDBERG 1000/550 for Cisco CallManager
(
WITH THE PRODUCT LOGO POINTING UPWARDS
.
13
Installation
). P
USH THE CARD INTO THE SLOT UNTIL