Power Cable; Lan Cable; Wireless Lan - Insert Pc Card - TANDBERG 1000 User Manual

Installation

Power Cable

• Connect the power supply to the 'DC in' input on
the system.
• Connect the power cable to the power supply.
• Connect the power cable to an electrical
distribution socket.

LAN Cable

• Connect a LAN cable from the 'Ethernet' connector on the system to your
LAN.

Wireless LAN - Insert PC Card

• Remove the "dummy" card by pressing the 'Eject' button next to the slot.
• Insert the Wireless LAN PC Card.
M
NOTE AKE SURE YOU INSERT THE CARD IN THE RIGHT DIRECTION
INTO THE SLOT UNTIL THE
See 'Wireless LAN Settings' for configuration.
TANDBERG 1000/550 for Cisco CallManager
'E ' .
JECT BUTTON POPS UP
( ). P
SEE DRAWING USH THE CARD
10