Table of Contents
Advertisement
8.6
Recall time
This setting is useful to access certain network and PABX/switchboard services.
The default IT.6XC recall time is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press OK, scroll
d
2. Scroll
to
Recall
e
u
d
3. Press
or
to select the setting you want: Short, Medium, Long.
4. Press
OK
to confirm.
5. Press
to return to standby.
NOTE
The functionality of your IT.6XC cannot be guaranteed on all PABX.
8.7
Dial mode
The default IT.6XC dialling mode is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press Menu, scroll
d
2. Scroll
to
Dial
u
e
d
3. Press
or
to select
4. Press
OK
to confirm.
5. Press
to return to standby.
8.7.1
Temporarily switch from Pulse to Tone dialling
l
1. Press
before dialling the number will change the dial mode from Pulse to Tone for
the duration of the call.
8.8
Switch auto clock on / off
If you have subscribed to Caller ID Service, the date and time will be set on all your
handsets whenever a call is received. This feature can be set to On or Off.
1. Press Menu, scroll
d
e
2. Scroll
to
Auto clock
d
3. Scroll
to
On
or
4. Press
to return to standby
8.9
Registration
Up to 4 handsets can be registered to one base station. Additional handsets must be
registered to the base before you can use them.
•
The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
32
d
to
Advanced Set
and press OK.
time. Press OK.
d
to
Advanced Set
Mode. Press OK.
Tone
or Pulse.
d
to
Advanced Set
and press OK.
Off
then press
OK
and press OK.
and press OK.
to confirm.
Advanced settings
Hide quick links:
Advertisement
Table of Contents
