Download Print this page

Advanced Settings; Recall Time; Dial Mode; Temporarily Switch From Pulse To Tone Dialling - Motorola D10 SERIES User Manual

Hide thumbs

Advertisement

8. Advanced settings

8.1

Recall time

This setting is useful to access certain network and PABX/switchboard services.
The default D10 recall time is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
m
1. Press
, scroll
2.
RECALL TIME
is displayed. Press
u
d
3. Press
or
to select the setting you want: SHORT, MEDIUM, LONG.
m
4. Press
to confirm.
>
5. Press
to return to standby.
NOTE
The use of your D10 cannot be guaranteed on all PABX.
8.2

Dial mode

The default D10 dialling mode is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
m
1. Press
, scroll
d
2. Scroll
to
DIAL
u
d
3. Press
or
to select
m
4. Press
to confirm.
>
5. Press
to return to standby.
8.2.1

Temporarily switch from Pulse to Tone dialling

1. In talk mode press and hold
The dial mode will change from Pulse to Tone for the duration of the call.
8.3

Call barring

Prevent certain numbers from being dialled from your D10. Store up to four specific
numbers, each up to 4 digits – for example, international or local prefixes.
Bypass Call barring by switching the setting to OFF.
NOTE
If you switch Call barring on,
mode.
32
d
to
ADVANCED SET
m
d
to
ADVANCED SET
m
MODE. Press
.
TONE
or PULSE.
*
for 2 seconds.
BARR MODE ON
m
and press
.
.
m
and press
.
will be displayed on your screen in standby
Advanced settings

Hide quick links:

Advertisement

loading

  Also See for Motorola D10 SERIES

  Related Manuals for Motorola D10 SERIES

This manual is also suitable for:

D1002D1001D1003D1004