Advanced Settings; Recall Time; Dial Mode; Call Barring - Motorola D1001 User Manual

8. Advanced settings

This setting is useful to access certain network and PABX/switchboard services.

Recall time

The default D1000 recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
m d
1. Press , scroll to ADVANCED SET and press
m
2. RECALL TIME is displayed. Press .
u d
3. Press or to select the setting you want: SHORT, MEDIUM, LONG.
m
4. Press to confirm.
>
5. Press to return to standby.
NOTE
The use of your D1000 cannot be guaranteed on all PABX.

Dial mode

The default D1000 dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
m d
1. Press , scroll to ADVANCED SET and press
d m
2. Scroll to DIAL MODE. Press .
u d
3. Press or to select TONE or PULSE.
m
4. Press to confirm.
>
5. Press to return to standby.

Temporarily switch from Pulse to Tone dialling

*
1. Press and hold .
The dial mode will change from Pulse to Tone for the duration of the call.

Call barring

Prevent certain numbers from being dialled from your D1000. Store up to four specific numbers,
each up to 4 digits – for example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on, BARR MODE ON will be displayed on your screen in standby mode.

Switch call barring on/off

m d
1. Press , scroll to ADVANCED SET and press
d m
2. Scroll to CALL BARRING. Press .
3. Enter the master PIN (default setting 0000) and press
m
4. MODE is displayed. Press .
u d m
5. Press or to select ON or OFF. Press
>
6. Press to return to standby. You can now set the number
(See below).
Advanced settings
m
.
m
.
m
.
m
.
to confirm.

Set a number to be barred

m d
1. Press , scroll to ADVANCED SET and press
d m
2. Scroll to CALL BARRING. Press .
3. Enter the master PIN (default setting 0000) and press
d m
4. Scroll to NUMBER. Press .
u d
5. If necessary, scroll or to the next available slot.
m
6. Press and enter the number or prefix you want to bar. Press
to confirm.
>
7. Press to return to standby.

Easy call

When activated, this feature allows you to dial a number by pressing any key on your handset
>
(except ). This feature is very useful for access to emergency services.

Switch easy call on/off

m d
1. Press , scroll to ADVANCED SET and press
d m
2. Scroll to EASY CALL. Press .
3. Enter the master PIN (default setting 0000) and press
m
4. MODE is displayed. Press then press
>
5. Press to return to standby.
NOTE
If you switch Easy call on, EASY CALL ON will be displayed on your screen in standby mode.
To switch Easy call off again:
>
1. Press .
m
2. OFF? is displayed. Press to confirm.

Set the easy call number

m d
1. Press , scroll to ADVANCED SET and press
d m
2. Scroll to EASY CALL. Press .
3. Enter the master PIN (Default setting 0000) and press
d m
4. Scroll to NUMBER. Press .
m
5. Enter the number. Press to confirm
>
6. Press to return to standby.

Dial an easy number

When an easy call number has been stored and the easy call setting switched on, press any key
>
(apart from ), to dial a number.
NOTE
When easy call is switched on, you can still answer any incoming call as normal.
m
.
m
.
m
m
.
m
.
u d m
or to select ON or OFF. Press to confirm.
m
.
m
.
17