Advanced Settings; Recall Time; Dial Mode; Temporarily Switch From Pulse To Tone Dialling - Motorola S3001 User Manual

8. Advanced settings

8.1

Recall time

This setting is useful to access certain network and PABX/switchboard
services.
The default S3000 recall time is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press , scroll
RECALL TIME
2. is displayed. Press
to select the setting you want: SHORT, MEDIUM, LONG.
3. Press or
4. Press to confirm.
5. Press to return to standby.
NOTE
The use of your S3000 cannot be guaranteed on all PABX.
8.2

Dial mode

The default S3000 dialling mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press , scroll
DIAL
2. Scroll to
3. Press or to select
4. Press to confirm.
5. Press to return to standby.
8.2.1

Temporarily switch from Pulse to Tone dialling

1. In talk mode press and hold
The dial mode will change from Pulse to Tone for the duration of the call.
8.3

Call barring

Prevent certain numbers from being dialled from your S3000. Store up to
four specific numbers, each up to 4 digits – for example, international or
local prefixes.
Bypass Call barring by switching the setting to OFF.
NOTE
If you switch Call barring on,
standby mode.
to ADVANCED SET
ADVANCED SET
to
MODE. Press
.
TONE or PULSE.
BARR MODE ON
and press .
.
and press .
for 2 seconds.
will be displayed on your screen in
Advanced settings
33