Ejecting The Pd-Tip - BRAND HandyStep S Operating Manual

Ejecting the PD-Tip

Operation
1.
Hold the HandyStep
2.
Empty the PD-Tip by pushing the
locking/filling lever to its lower stop.
3.
Swing out the locking/filling lever
(the piston will then be decoupled).
4.
Hold the HandyStep
waste container. Press the ejection
key down, releasing the cylinder.
The PD-Tip will be ejected.
Warning!
Residues of the medium might be pres-
ent on the PD-Tip orifice. The PD-Tip
should only be ejected in a manner that
does not pose a hazard to the user or
other persons.
Note:
The tightness of the seal of the PD-Tips
is not guaranteed for repeated dispen-
sing of high viscosity media.
32
S over a vessel.
®
S over the
®
2
3
4