A Glossary - Texas Instruments TMS320C6000 Reference Manual

A
address:
A-law companding: See compress and expand (compand) .
API: See application programming interface.
API module: A set of API functions designed for a specific purpose.
application programming interface (API): Used for proprietary applica-
assembler: A software program that creates a machine language program
assert: To make a digital logic device pin active. If the pin is active low, then
B
bit: A binary digit, either a 0 or 1.
big endian: An addressing protocol in which bytes are numbered from left
block: The three least significant bits of the program address. These corre-
The location of program code or data stored; an individually
accessible memory location.
tion programs to interact with communications software or to conform to
protocols from another vendor's product.
from a source file that contains assembly language instructions, direc-
tives, and macros. The assembler substitutes absolute operation codes
for symbolic operation codes and absolute or relocatable addresses for
symbolic addresses.
a low voltage on the pin asserts it. If the pin is active high, then a high
voltage asserts it.
to right within a word. More significant bytes in a word have lower num-
bered addresses. Endian ordering is specific to hardware and is deter-
mined at reset. See also little endian .
spond to the address within a fetch packet of the first instruction being
addressed.
Appendix A
Appendix A
Glossary
A-1